Consisting of all standard PIC circuits all components, plug in IC sockets and hook-up headers populated, MAX 232, RS232 interface ICD ready, Power supply, Stepper motor driver, open RS232 DB9 with 9 pin SIP hook-up header, IDE connector with DIP hook-up headers, plug in breadboard, 16 bi colour LED's and 3 digit LED display.
Excluding 40pin ZIF socket, LCD Display, keypad and hook-up wires.
Because of the difference in mains supply voltage of countries in the world no transformer is supplied with the board, any transformer with an output of 13 to 30 volt AC or 15 to 30 volt DC at least 2 Amp is suitable.
40 pin wide ZIF
If
ordered the with the Basic board it wil be soldered into the board in
the factory, it can take any device from a DIP 4 up to DIP 40.
With DIP16 open plug to be plugged into the header on the Basic
board
It is supplied with a SIP 8 open plug to plug onto the 8 pin header on
the Basic board.
4X4 White keypad
With full alphabet, it is supplied with a SIP 8 open plug to plug onto
the 8 pin header on the Basic board.
Can also be soldered in if ordered with the Basic board. Plug in option also available.
Transmitter module
Can also be soldered in if ordered with the Basic board, Plug in option also available.
Hook-up wires
One set of 24 hook-up wires with shrink open plugs, to plug into headers on the Basic board
With sample programs, demos, circuit diagrams, PC interfacing software etc.
No
need for a power supply, it draw its power from the USB port on your PC.
Drivers are included on the CD or can be downloaded free from the
internet, can program most of the flash type PIC devices with ICSP .
Is ideal low cost for experimenting, students and hobbyists All used
displays is properly tested.
Sine wave Inverter kit.
Kit 1: From 300 watt to 10 Kilo watt Inverter only.(2 Kw. stags.)
Ready made and populated control PCB that can be connected to a set of parallel power output transistors. One pre-programmed MCU that is generating a sine wave into a driver from where you get your signal to drive a set of power transistors, up to 20 or more in parallel depending on your wattage needs. Full easy to follow assembly instructions of the power stage.
$129 USD
Kit 2: From 300 watt to 10 Kw UPS functions.(2 Kw. stags.)
Ready made and populated control PCB that can be connected to a set of parallel power output transistors. Two pre-programmed MCU's the first MCU do all the control of the inverter with a LCD display and other functions like monitoring of the mains that will automatically start your inverter when the power fail, charging control and voltage regulation. The second MCU do the same as version one. That is generating a sine wave into a driver from where you get your signal to drive a set of power transistors, up to 20 or more in parallel depending on your wattage needs. Full easy to follow assembly instructions of the power stage. LCD display additional.
$229 USD